Plotter 距離 Distance
Plotterは距離(Distance)と方向(Course)を求める事が出来ます。 ここでは下の例を使って、距離の図り方を説明したいと思います。
真ん中の線が、忙しい地域用に発売されている、細かいTerminal Area Chart向けです。
両外の目盛がSectional Chart向けです。 上の線は、Plotter全体で長い距離が測定できます。下のは円盤の中心を「0」としています。
白色線の内側は、WCA,World Areonautical Chart用です。 細かさは有りませんが、広範囲の飛行に便利なチャートです。
この写真の面はNautical Mile用ですが、裏面は一般の生活にマイルとして使われているStatute Mileです。
(Refer to this figure) Determine the magnetic heading (and Estimated Time En Route )for a flight from Allendale County Airport (area 1) to Claxton-Evans County Airport (area 2). The wind is from 090°at 16 knots, and the true airspeed is 90 knots. (Allendale空港からClaxton空港の時間・距離は?この問題は飛行時間を求める問題ですが、距離が分らないと回答できませんので選びました。)

片方の空港に「0 マイル」に合わせて、反対側の地点の距離を読み取ります。 AllendaleからClaxtonは55.5マイルでした。
Courseを求めるには